DIRECTIONS FOR USE
Surface preparation
The surface should be even, clean, dry, free from dust and adhesion impairing agents.
Remove old wallpapers, layers of old paint, possible flaking paint, fill deep scratches and bigger gaps using KOSBUD GS 400 filler. Chalk and sand surfaces should be primed using GRUNLIT U or GRUNLIT G. Surfaces that have never been painted and non-uniform surfaces should be primed using GRUNLIT ML in order to equalize absorption of the surfaces and lower paint consumption.
Product preparation
Stir carefully directly before use.
Application
After preparing the surface accordingly, apply Royal White paint evenly on the whole surface using paint brush, roller or paint sprayer according to the wet-on-wet method.
Wash all tools with water directly after painting.
Using dirty tools may decrease the quality of the layer. Wearing protective clothing and gloves during painting is recommended.
IMPLEMENTING GUIDELINES
Secure surfaces exposed to contamination. In case of contamination remove it using hot water before it dries. Apply paint only after the surface dries out completely. We recommend that fresh cement and lime plaster is not painted earlier than 3-4 weeks and gypsum plaster not earlier than 2 weeks after their application. Apply the second layer of paint after the first one dries out, namely after about 3-5 h. The temperature of the surface and the environment during painting and paint drying should fit into the range between +10° C and +28° C.
